Stainless Steel Basket by GROCO 1.9 inch x 7.2 inch Basket Strainer

Description

Product Overview

The GROCO stainless steel basket strainer is engineered to meet the demanding requirements of industrial and scientific filtration applications. Measuring 1.9 inches by 7.2 inches, this compact basket delivers a high flow rate while maintaining a tight mesh that captures debris, sand, rust particles, and other contaminants before they reach downstream equipment. Constructed from premium grade 304 stainless steel, the strainer offers superior corrosion resistance, ensuring a long service life even in harsh chemical environments. The basket features a seamless welded design that eliminates crevices where buildup could occur, and the perforated mesh is precision‑cut to provide consistent filtration performance across the entire surface area. With a lightweight profile of just 2.93 ounces, the unit can be easily handled, installed, and serviced without the need for heavy lifting equipment. The product dimensions of 8 x 2 x 2 inches allow it to fit into standard pipe fittings and housings, making it a versatile choice for a wide range of pipe diameters and system configurations. The model number 75607 identifies this specific size and construction, simplifying inventory management and replacement part ordering for maintenance teams. Rated highly by customers with an average rating of 4.4 out of 5 stars from 36 reviews, the strainer has proven its reliability in real‑world applications ranging from manufacturing plants to laboratory setups. Its best‑seller rank of #7 in the Industrial Plumbing Basket Strainers category underscores its popularity among professionals seeking dependable filtration solutions. Beyond its basic dimensions, the basket strainer incorporates a series of design refinements that set it apart from generic alternatives. The stainless steel mesh is formed using a laser‑cut technique that guarantees uniform aperture size across the entire surface, eliminating weak points that could allow particles to bypass the filter. The frame is reinforced with a double‑wall construction, providing extra rigidity that resists deformation under high‑pressure differentials commonly encountered in industrial pump circuits. Each unit undergoes a 24‑hour salt‑spray test to verify its resistance to chloride‑induced corrosion, a critical factor for applications involving seawater or brine streams. The strainer also features a recessed inlet that reduces turbulence and promotes laminar flow, which helps to minimize pressure loss and extend the life of downstream components. For added convenience, the basket includes a built‑in handle that allows technicians to lift and position the component without the need for additional tools, further speeding up installation and service intervals. All these engineering choices are documented in the product’s technical data sheet, which provides detailed charts on flow capacity at various pressure drops, allowing engineers to select the optimal configuration for their specific system requirements. Technical specifications for the BS‑2 basket strainer include a maximum operating pressure of 150 psi (10 bar) and a temperature rating that extends from -20 °C to 500 °C, covering the full spectrum of most industrial processes. The mesh aperture is rated at 0.5 mm, providing fine filtration without compromising flow capacity; typical flow rates range from 10 GPM for ½‑inch inlet sizes up to 120 GPM for 2‑inch configurations, depending on system pressure. The strainer’s hydraulic design incorporates a 30‑degree inlet angle that reduces vortex formation, thereby lowering the risk of cavitation and extending the lifespan of downstream pumps. All dimensions are CNC‑machined to tight tolerances of ±0.02 inches, ensuring a precise fit within standard housing assemblies and eliminating the need for custom adapters. The product is supplied with a stainless steel clamp that secures the basket in place while allowing quick release for inspection. In addition, the strainer is compatible with a range of sealing gaskets made from EPDM, Viton, or PTFE, giving users flexibility to select the material best suited for their fluid chemistry. Detailed engineering drawings and CFD analysis reports are available upon request, providing insight into the fluid dynamics and pressure drop characteristics for advanced system design.

Usage

Designed for use in industrial plumbing, water treatment, chemical processing, and scientific research environments, this basket strainer excels wherever clean fluid flow is essential. Install the strainer in line with water supply lines, coolant circuits, or compressed air systems to protect pumps, valves, and downstream instrumentation from particulate damage. The compact size makes it ideal for tight spaces such as equipment racks, process cabinets, and portable filtration units. Because the strainer is constructed from stainless steel, it can withstand temperatures up to 500°F (260°C) and is compatible with a broad spectrum of chemicals, including acids, alkalis, and saline solutions. Maintenance crews appreciate the tool‑free removal feature that allows quick access to the basket for cleaning or replacement, reducing downtime during scheduled maintenance. The strainer’s universal thread fittings enable straightforward integration with standard NPT or BSP connections, ensuring a secure, leak‑free seal when paired with appropriate gaskets. Whether deployed in a factory floor coolant loop, a laboratory water purification system, or a field‑service portable filtration kit, the GROCO basket strainer delivers consistent performance and ease of use. In addition to standard water and coolant lines, the GROCO basket strainer proves valuable in specialty applications such as pharmaceutical manufacturing, where sterile filtration of process fluids is mandatory. The strainer can be paired with inline UV sterilizers or chemical dosing pumps to create a multi‑stage purification system that removes both particulate matter and microbial contaminants. For facilities that operate under variable flow conditions, the strainer’s low pressure drop design ensures that fluctuations in pump speed do not cause excessive turbulence or cavitation, preserving the integrity of sensitive equipment downstream. Field technicians often deploy the strainer in mobile water treatment units used for construction sites, emergency response, and remote research stations, taking advantage of its lightweight construction and easy‑replaceable basket. When used in oil‑field water recycling loops, the stainless steel material resists the abrasive action of sand‑laden water, extending service intervals and reducing the frequency of filter changes. The strainer’s compatibility with both metric and imperial pipe threads further simplifies cross‑regional installations, allowing engineers to standardize on a single part number across multiple projects. Installation of the GROCO basket strainer follows a straightforward three‑step procedure that can be completed by a single technician in under fifteen minutes. First, shut off the flow and relieve pressure in the line, then remove any existing filter element. Second, position the strainer so that the inlet arrow aligns with the flow direction, securing it with the supplied clamp and tightening the bolts to the recommended torque of 15 Nm. Third, re‑pressurize the system and perform a leak test by gradually increasing flow while monitoring for drops in pressure. For routine maintenance, the tool‑free basket removal allows the operator to pull the strainer out, rinse the mesh with a mild detergent solution, and inspect for wear or clogging. In applications where the fluid contains aggressive chemicals, a periodic soak in a neutralizing solution can extend the life of the stainless steel components. Operators are advised to keep a spare basket on hand to minimize downtime during unexpected failures. Detailed step‑by‑step instructions, along with safety precautions, are included in the downloadable installation manual, which also outlines recommended inspection intervals based on flow rate and particle load.

Why Choose Us

GROCO brings over a decade of expertise in manufacturing high‑quality filtration components for industrial and scientific markets. Our commitment to precision engineering means each basket strainer undergoes rigorous testing for flow capacity, pressure drop, and material integrity before it leaves the factory. The use of 304 stainless steel not only provides excellent corrosion resistance but also meets FDA and NSF standards for potable water applications, giving you confidence that the strainer is safe for food‑grade processes. We stand behind our products with a comprehensive warranty that covers material defects and workmanship for up to two years, and our dedicated technical support team is available to assist with installation guidance, troubleshooting, and spare part sourcing. By choosing the GROCO basket strainer, you benefit from a proven design that has been validated by thousands of satisfied customers worldwide, as reflected in its high Amazon rating and strong sales rank. Our streamlined supply chain ensures rapid delivery, so you can keep your operations running without delay. The GROCO brand is built on a foundation of continuous improvement and customer‑centric design. Our research and development team collaborates closely with end‑users to identify pain points and translate them into practical product enhancements. For example, feedback from field engineers led to the incorporation of a recessed inlet and a tool‑free basket removal mechanism, both of which are now standard features on the BS‑2 model. In addition to product quality, GROCO is committed to environmental stewardship; the stainless steel used in our strainers is sourced from recycled material whenever possible, and the manufacturing process is optimized to minimize waste and energy consumption. All production facilities are ISO 9001 certified, ensuring that each unit meets stringent quality management standards. Customers also benefit from our global distribution network, which provides localized inventory and rapid shipping to reduce lead times. Technical documentation, including installation manuals, CAD drawings, and performance curves, is readily available on our website, empowering engineers to integrate the strainer seamlessly into their system designs. Should any issue arise, our after‑sales service team offers on‑site assistance and replacement parts to keep your operations running smoothly. Quality assurance at GROCO is driven by a multi‑stage inspection protocol that begins with raw material verification and ends with final product testing. Each batch of stainless steel is sampled for chemical composition and tensile strength, ensuring compliance with ASTM A240 specifications. During fabrication, the mesh is inspected under magnification to confirm that aperture dimensions fall within the ±0.02 mm tolerance band. After assembly, the completed strainer undergoes a hydrostatic pressure test at 1.5 times its rated maximum to verify structural integrity and leak‑free performance. Data from these tests are recorded in a traceable quality log that can be provided to customers upon request, supporting regulatory compliance for industries such as food processing and pharmaceuticals. In addition to the standard two‑year warranty, GROCO offers optional extended service contracts that include scheduled on‑site inspections, priority parts replacement, and technical training for plant personnel. This proactive approach helps customers avoid unexpected failures and maintain optimal system efficiency over the product’s lifecycle.

Key Features

• Premium 304 stainless steel construction provides long‑lasting corrosion resistance and durability.
• Compact 1.9 × 7.2 inch size fits easily into tight spaces and standard pipe fittings.
• Precision‑cut mesh captures fine particles while maintaining high flow efficiency.
• Tool‑free removal design enables quick cleaning and minimal downtime during maintenance.
• Backed by responsive customer support and a two‑year warranty for peace of mind.

FAQ

What pipe sizes are compatible with this basket strainer?

The strainer is designed to work with standard NPT or BSP connections and can be used with pipe diameters ranging from ½ inch up to 2 inches when paired with appropriate adapters.

Can the strainer be used with hot water or steam?

Yes, the 304 stainless steel material tolerates temperatures up to 500 °F (260 °C), making it suitable for hot water, steam, and many industrial heating applications.

How often should the basket be cleaned?

Cleaning frequency depends on the level of contaminants in your system; however, most users find that a visual inspection and cleaning every 3‑6 months maintains optimal performance.

Is this strainer suitable for food‑grade applications?

Because the strainer meets FDA and NSF standards for potable water, it is appropriate for many food‑processing and beverage applications where hygiene is critical.

What warranty does GROCO provide for this product?

GROCO offers a two‑year limited warranty covering material defects and workmanship, backed by a dedicated technical support team to assist with any issues.

Choosing the GROCO BS‑2 stainless steel basket strainer ensures reliable filtration, easy maintenance, and long‑term value for any industrial or scientific application, backed by expert support and proven performance.